Sprache: English | Deutsch | 中国的       Change Country
Macraigor Systems
Macraigor Systems is a leading supplier of BDM / JTAG connections for on-chip debugging of embedded microprocessors. Macraigor Systems’ solutions are designed for price-sensitive customers and provide the best price/performance ratio in the industry. Macraigor provides free software debug tools that support Windows and Linux host systems and their devices are also compatible with many third-party debuggers. In addition, Macraigor markets a Flash Programmer utility that allows in-circuit programming of Flash memory via a BDM/JTAG port.  




Debugger /Simulatoren

Emulatoren

IDE (Compiler usw.)

JTAG Emulatoren

Andere Software Werkzeuge

Programmers

WiFiDemon - Ethernet and WiFi

WiFiDemon - Ethernet and WiFiMacraigor Systems´ WiFiDemon™ provides the embedded systems developer with the most advanced and intelligent target available for target on-chip debugging.

Raven for 16 pin AMCC COP header

Raven for 16 pin AMCC COP headerusb to JTAG port for AMCC COP development boards

Raven for 16 pin Freescale COP header

Raven for 16 pin Freescale COP headerusb to JTAG port for Freescale COP development boards

Raven for OnCE and Tensilica

Raven for OnCE and Tensilicausb to 14 pin JTAG tool for Freescale DSP and Tensilica processors.

usb2Wiggler™ for OnCE and Tensilica

usb2Wiggler™  for OnCE and TensilicaDas usb2Wiggler™ ist ein Interface der mittleren Preisklasse, das bei Design, Debugging und Programmieren von Mikroprozessor basierten embedded Systemen genutzt wird. Eine Seite des usb2Wiggler&

usb2Wiggler™ for 10 pin BDM header

usb2Wiggler™  for 10 pin BDM headerusb to JTAG/BDM tool for Freescale MPC5xx and MPC8xx processor families

usb2Sprite™ for Intel Xscale

usb2Sprite™ for Intel XscaleThe usb2Sprite™ is a low cost Universal Serial Bus interface for the design, debug and programming of microprocessor based embedded systems.

usb2Demon ™ for 16 pin Freescale COP header

usb2Demon ™ for 16 pin Freescale COP headerUSB auf  JTAG Port für alle Freescale COP Entwicklungsboards.

usb2Demon ™ for 16 pin AMCC COP header

usb2Demon ™ for 16 pin AMCC COP headerDas usb2Demon™ ist ein Interface der mittleren Preisklasse, das bei Design, Debugging und Programmieren von Mikroprozessor basierten embedded Systemen genutzt wird. Eine Seite des usb2Demon&trad

usb2Demon™ for OnCE and Tensilica

usb2Demon™  for OnCE and TensilicaUSB auf 14 Pin JTAG Port Tool für Freescale DSP und Tensilica Prozessoren.

mpDemon™ for Intel Xscale

mpDemon™ for Intel XscalempDemon™ for Intel Xscale development board

Raven for 10 pin BDM header

Raven for 10 pin BDM headerusb to JTAG/BDM tool for Freescale MPC5xx and MPC8xx processor families

Raven for 14 pin MIPS EJTAG header

Raven for 14 pin MIPS EJTAG headerusb to JTAG tool supports all MIPS based boards with 14 pin EJTAG port - Broadcom, MIPS 32/64, Alchemy, and Cavium processors and AMD processor families

usb2Demon™ for Intel Atom 31 pin JTAG header

usb2Demon™  for Intel Atom 31 pin JTAG headerUSB auf JTAG Port Tool für Intel ATOM Prozessoren mit einem 31 Pin JTAG Header.

usb2Demon™ for Intel Atom 60 pin JTAG header

usb2Demon™  for Intel Atom 60 pin JTAG headerUSB auf JTAG Port Tool für Intel ATOM Prozessoren mit einem 60 Pin Header.

usb2Sprite™ for 16 pin AMCC COP header

usb2Sprite™ for 16 pin AMCC COP headerThe usb2Sprite™ is a low cost Universal Serial Bus interface for the design, debug and programming of AMCC (formerly IBM) PowerPC COP microprocessor based embedded systems.

usb2Sprite™ for 16 pin Freescale COP header

usb2Sprite™ for 16 pin Freescale COP headerThe usb2Sprite™ is a low cost Universal Serial Bus interface for the design, debug and programming of Freescale COP microprocessor based embedded systems.

usb2Sprite™ for Freescale 56xxx and Tensilica processors

usb2Sprite™ for Freescale 56xxx and Tensilica processorsThe usb2Sprite™ is a low cost Universal Serial Bus interface for the design, debug and programming of Freescale 56xxx and Tensilica basedmicroprocessor embedded systems.

usb2Wiggler™ for 16 pin Freescale COP header

usb2Wiggler™ for 16 pin Freescale COP headerDas usb2Wiggler™ ist ein Interface der mittleren Preisklasse, das bei Design, Debugging und Programmieren von Mikroprozessor basierten embedded Systemen genutzt wird. Eine Seite des usb2Wiggler&

usb2Wiggler™ for 14 pin MIPS EJTAG header

usb2Wiggler™ for 14 pin MIPS EJTAG headerDas usb2Wiggler™ ist ein Interface der mittleren Preisklasse, das bei Design, Debugging und Programmieren von Mikroprozessor basierten embedded Systemen genutzt wird. Eine Seite des usb2Wiggler&

usb2Wiggler™ for 16 pin AMCC COP header

usb2Wiggler™ for 16 pin AMCC COP headerDas usb2Wiggler™ ist ein Interface der mittleren Preisklasse, das bei Design, Debugging und Programmieren von Mikroprozessor basierten embedded Systemen genutzt wird. Eine Seite des usb2Wiggler&

Raven 20 pin ARM JTAG header

Raven  20 pin ARM JTAG headerusb to JTAG port tool for ARM 7, 9 and 11 processor families

Raven for Intel Xscale

Raven for Intel Xscaleusb to JTAG tool for Intel Xscale processor with a 20 pin JTAG header

mpDemon™ 10 pin BDM header

_mpDemon™ 10 pin BDM headerThe Macraigor Systems´ mpDemon™ for the Freescale MPC5xx and MPC8xx processor families.

Wiggler for Intel Xscale processor family

_Wiggler for Intel Xscale processor familyThe Wiggler is a parallel port interface for either JTAG or BDM debugging. Slower than a Raven, it is however a stable, easy to use device and is fully compatible with all of our Windows software.

usb2Sprite™ for 14 pin MIPS EJTAG header

usb2Sprite™ for 14 pin MIPS EJTAG headerThe usb2Sprite™ is a low cost Universal Serial Bus interface for the design, debug and programming of MIPS based 32/64 embedded systems.

Wiggler with 20 pin ARM JTAG header

Wiggler with 20 pin ARM JTAG headerThe Wiggler is a parallel port interface for either JTAG or BDM debugging. The Wiggler for ARM supports the 7, 9 and 11 processor families as well as M3 and A8. Slower than a Raven, it is, however, a

usb2Demon™ for Intel Xscale 20 pin JTAG header

_usb2Demon™  for Intel Xscale 20 pin JTAG headerusb to JTAG tool for Intel Xscale processor with a 20 pin JTAG header

usb2Sprite™ for 20 pin ARM JTAG header

usb2Sprite™ for 20 pin ARM JTAG headerThe usb2Sprite™ is a low cost Universal Serial Bus interface for the design, debug and programming of microprocessor based embedded systems.

Wiggler for 14 pin MIPS EJTAG header

Wiggler for 14 pin MIPS EJTAG headerThe Wiggler is a parallel port interface for either JTAG or BDM debugging. Slower than a Raven, it is, however, a stable, easy to use device and is fully compatible with all of our Windows software.

Wiggler for Freescale MPC 5xx/8xx processor families

Wiggler for Freescale MPC 5xx/8xx processor familiesThe Wiggler is a parallel port interface device for a development board with a 10 pin BDM header. Slower than a Raven, it is, however, a stable, easy to use device and is fully co

usb2Wiggler™ for Intel Xscale

usb2Wiggler™  for Intel Xscaleusb to JTAG tool for Intel Xscale processors with a 20 pin JTAG header

usb2Wiggler™ 20 pin ARM JTAG header

usb2Wiggler™  20 pin ARM JTAG headerUSB auf JTAG Port Tool für ARM 7, 9 und 11 Prozessor Familien.

usb2Wiggler™ 14 pin ARM JTAG header

usb2Wiggler™ 14 pin ARM JTAG headerUSB auf JTAG Port Tool für ARM 7, 9 und 11 Prozessor Familien

mpDemon™ for OnCE and Tensilica

mpDemon™  for OnCE and TensilicaSupports Freescale DSP 56xxx and Tensilica Xtensa development boards.

mpDemon™ 14 pin ARM JTAG header

_mpDemon™ 14 pin ARM JTAG headerEthernet, serial, and parallel port interface for ARM 7, 9 and 11 processor families.

mpDemon™ 20 pin ARM JTAG header

_mpDemon™ 20 pin ARM JTAG headerEthernet, serial, and parallel port interface for ARM 7, 9 and 11 processor families.

usb2Demon™ for 14 pin MIPS EJTAG header

usb2Demon™ for 14 pin MIPS EJTAG headerUSB auf JTAG Tool für alle MIPS basierten Boards mit 14 pin EJTAG Port - Broadcom, MIPS 32/64, Alchemy, Cavium und AMD Prozessoren.

usb2Demon™ for 10 pin BDM header

_usb2Demon™  for 10 pin BDM headerusb to JTAG/BDM tool for Freescale MPC5xx and MPC8xx processor families

usb2Demon™ for Intel ATOM

_usb2Demon™ for Intel ATOMusb to JTAG tool for Intel ATOM processor with a 24 pin JTAG header

usb2Demon™ 20 pin ARM JTAG header

_usb2Demon™  20 pin ARM JTAG headerUSB auf JTAG Port Tool für ARM 7, 9 und 11 Prozessor Familien

Wiggler for Freescale 56xxx and Tensilica processors

Wiggler for Freescale 56xxx and Tensilica processorsThe Wiggler is a parallel port interface for either JTAG or BDM debugging. Slower than a Raven, it is however a stable, easy to use device and is fully compatible with all of our Windows software.

Wiggler with 14 pin ARM JTAG header

Wiggler with 14 pin ARM JTAG headerThe Wiggler is a parallel port interface for either JTAG or BDM debugging. The Wiggler for ARM supports the 7, 9 and 11 processor families as well as M3 and A8. Slower than a Raven, it is, however, a

Raven 14 pin ARM JTAG header

_Raven 14 pin ARM JTAG headerusb to JTAG port tool for ARM 7, 9 and 11 processor families

mpDemon™ for 16 pin Freescale COP header

_mpDemon™ for 16 pin Freescale COP headerSupports all Freescale COP development boards.

usb2Demon™ 14 pin ARM JTAG header

_usb2Demon™ 14 pin ARM JTAG headerUSB auf JTAG Port Tool für ARM 7, 9 und 11 Prozessor Familien

mpDemon™ for 14 pin MIPS EJTAG header

_mpDemon™ for 14 pin MIPS EJTAG headerSupports all MIPS based boards with 14 pin EJTAG port - Broadcom, MIPS 32/64, Alchemy, Cavium and AMD processors.

mpDemon™ for 16 pin AMCC COP header

mpDemon™ for 16 pin AMCC COP headerSupports AMCC COP development boards.