The MPQ-PSoC is a 4-port, in-circuit manufacturing programmer for CYpress Semiconductor PSoC, PSoC3, CapSense Express, enCoRe II, enCoRe III, enCoRe V and Ovation ONS microcontrollers.

Fast and Portable
Up to four different target images can be stored in the programmer’s internal Flash memory, allowing faster programming times and standalone operation. In addi-tion, our adaptive programming algorithm provides the
fastest programming time for each image, while ensuring the image integrity of each device programmed.

Program Four Devices Simultaneously
Four port programming allows each MPQ to program the same image on up to four separate target devices simultaneously, increasing manufacturing throughput fourfold.

Stand-alone, ATE-Controlled or PC-Controlled
MPQ-PSoC can be operated stand-alone (just press a button to initiate programming), directly from a host PC using MPManager software, or under the control of your Automated Test Equipment (ATE) system.

Full Range of Voltage and Frequency Support
MPQ-PSoC is compatible with the full range of power supply voltages supported by Cypress PSoC devices, from 2.4 to 5.0V.

Rugged and Ready for Manufacturing Worldwide
Features like an extruded aluminum chassis, universalpower supply and extensive electrical protection ensure that MPQ-PSoC will be at home in any manufacturing environment.

Powerful Software - Field Upgradable
MPQ-PSoC comes complete with MPManager soft-ware to provide programmer configuration and image management, PC-controlled device programming, and more. MPManager also provides the ability to upgrade your MPQ-PSoC programmer on site as support for
new devices is released by RPM.

Secure Image Management
Secure your programming images, preventing them from being read back from the programmer, and define a maximum number of parts to be programmed from each image. Send your MPQ to CM’s anywhere in the world without worry

Autoserialization
MPQ-PSoC supports on-the-fly image modification,
allowing each device to be programmed with a unique serial number, MAC address, IP address, etc.

Specifications
Target Voltage Range: 1.70 to 5.0VDC
Power Supply: 100 to 240VAC, 50/60Hz, included
Operating Temperature Range: 0°C to +65°C

Software Support
RPM Systems MPManager Software
• Progammer Image Management
• Programmer Configuration
• PC-Controlled Programming
• Windows TM 98, NT, 2000, XP