Four Port In-System Programmer - Z8 » MPQ-Z8
Get an online QUOTE.
The MPQ-Z8 is a member of RPM’s family of dedicated in-system device programmers. Like all MPQ’s, it is designed to be reliable, efficient, flexible and cost effective - all of the features you require in a manufacturing programmer.
Fast and Portable
Up to four different target images can be stored in the programmer’s internal Flash memory, allowing faster programming times and standalone operation. In addition, our adaptive programming algorithm provides the fastest programming time for each image, while ensuring
the image integrity of each device programmed.
Program Four Devices Simultaneously
Four port programming allows each MPQ to program the same image on up to four separate target devices simultaneously, increasing manufacturing throughput fourfold.
Stand-alone, ATE-Controlled or PC-Controlled
MPQ-Z8 can be operated stand-alone (just press a button to initiate programming), directly from a host PC using MPManager software, or under the control of your Automated Test Equipment (ATE) system.
Full Range of Voltage and Frequency Support
MPQ-Z8 is compatible with the full Z8-Encore! range of power supply voltages, from 2.7 to 3.6V, and oper-ates with any supported target system clock frequency from 32KHz to 20MHz.
Rugged and Ready for Manufacturing World Wide
Features like an extruded aluminum chassis, universal power supply and extensive electrical protection ensure that MPQ-Z8 will be at home in any manufacturing environment.
Powerful Software - Field Upgradable
MPQ-Z8 comes complete with MPManager software to
provide programmer configuration and image manage-ment,
PC-controlled device programming, and more.
MPManager also provides the ability to upgrade your
MPQ-Z8 programmer on site as support for new devices
is released by RPM.
Secure Image Management
Secure your programming images, preventing them from being read back from the programmer, and define a maximum number of parts to be programmed from each image. Send your MPQ to CM’s anywhere in the world without worry.
Autoserialization
MPQ-Z8 supports on-the-fly image modification, allowing each device to be programmed with a unique serial number, MAC address, IP address, etc.
Specifications
Target Voltage Range: 2.70 to 3.6VDC
Target Frequency Range : 32KHz to 20MHz
Power Supply: 100 to 240VAC, 50/60Hz **
Operating Temperature Range: 0°C to +65°C
Software Support
RPM Systems MPManager Software
• Progammer Image Management
• Programmer Configuration
• PC-Controlled Programming
• Windows TM 98, NT, 2000, XP
Fast and Portable
Up to four different target images can be stored in the programmer’s internal Flash memory, allowing faster programming times and standalone operation. In addition, our adaptive programming algorithm provides the fastest programming time for each image, while ensuring
the image integrity of each device programmed.
Program Four Devices Simultaneously
Four port programming allows each MPQ to program the same image on up to four separate target devices simultaneously, increasing manufacturing throughput fourfold.
Stand-alone, ATE-Controlled or PC-Controlled
MPQ-Z8 can be operated stand-alone (just press a button to initiate programming), directly from a host PC using MPManager software, or under the control of your Automated Test Equipment (ATE) system.
Full Range of Voltage and Frequency Support
MPQ-Z8 is compatible with the full Z8-Encore! range of power supply voltages, from 2.7 to 3.6V, and oper-ates with any supported target system clock frequency from 32KHz to 20MHz.
Rugged and Ready for Manufacturing World Wide
Features like an extruded aluminum chassis, universal power supply and extensive electrical protection ensure that MPQ-Z8 will be at home in any manufacturing environment.
Powerful Software - Field Upgradable
MPQ-Z8 comes complete with MPManager software to
provide programmer configuration and image manage-ment,
PC-controlled device programming, and more.
MPManager also provides the ability to upgrade your
MPQ-Z8 programmer on site as support for new devices
is released by RPM.
Secure Image Management
Secure your programming images, preventing them from being read back from the programmer, and define a maximum number of parts to be programmed from each image. Send your MPQ to CM’s anywhere in the world without worry.
Autoserialization
MPQ-Z8 supports on-the-fly image modification, allowing each device to be programmed with a unique serial number, MAC address, IP address, etc.
Specifications
Target Voltage Range: 2.70 to 3.6VDC
Target Frequency Range : 32KHz to 20MHz
Power Supply: 100 to 240VAC, 50/60Hz **
Operating Temperature Range: 0°C to +65°C
Software Support
RPM Systems MPManager Software
• Progammer Image Management
• Programmer Configuration
• PC-Controlled Programming
• Windows TM 98, NT, 2000, XP