 |
|
|
|
Home » Entwicklungs Tools für PIC32MX360F512L
Debugger /Simulatoren Evaluierungsboard usw. IDE (Compiler usw.) JTAG Emulatoren Andere Software Werkzeuge Software Design Stacks/Protokolle/File System
emWin (Graphics Software and GUI)
 emWin, one of the most efficient and comprehensive embedded GUIs available, helps developers beat their timelines and cut their development costs. It is written in ANSI "C" and supports any
emUSB (Embedded USB Stack)
emUSB Host/Device Stack has been designed to work on any embedded system with a USB controller. Ports for most common USB controllers are available. It can be used with USB 1.1 or USB 2.0.
emFile (Embedded File System)
emFile is an embedded file system which can be used with any type of storage device. emFile is a high performance library that has been optimized for; minimum memory consumption in RAM and ROM, high s
FAT
 FAT is a high-performance, full-featured, FAT12/16/32-based, DOS-compatible file system designed for embedded applications.
SAFEFLASH
High-performance, failsafe flash file system. Provides wear leveling, bad block management.
TINY
TINY is a failsafe flash file system designed for minimal environments. It can be used with any flash device with small erasable sectors. It is ideal for most standard serial flash parts, as wel
SAFE-FAT
High-performance, failsafe FAT12/16/32 file system. SAFE-FAT is a journaling system. It guarantees that all operations will be carried out in a failsafe manner.
THIN
THIN is a highly optimized, reduced footprint version of our highly successful FAT system. This DOS compatible file system is designed for configurations with limited resources. It works well with the
FTL
FTL is a standard flash translation layer that allows an array of NAND flash to be addressed as a set of standard 512Byte, 2K or 4K logical sectors.
EUSBD
The EUSBD™ (Embedded USB) device stack has been designed by HCC’s embedded system engineers to provide the most efficient USB device solutions. EUSBD-BS (the EUSB Base System) provides a U
EUSBH
HCC´s EUSBH (Embedded USB Host Stack) is a full-featured host stack designed for embedded applications.
|
|
|
|
|
|
|
|
| |
